引用本文:
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览次   下载 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于反射声波测井有限元方法的井旁裂缝分布特征
闫怡飞1,2,赵云2,3,宋胜利4,暴喜涛2,周晓奇4,赵垒1,2,闫相祯2
(1.中国石油大学(华东)机电工程学院,山东青岛 266580;2.中国石油大学(华东)油气CAE技术研究中心, 山东青岛 266580;3.合肥京东方显示技术有限公司,安徽合肥 230012;4.中国石油化工集团公司中原油田分公司,河南濮阳 457001)
摘要:
基于声波传播理论,利用声波有限元方法研究存在井旁裂缝情况下的反射波波形特征。以井眼为对称轴,对有声阻抗不连续界面的侧进行二维轴对称有限元建模,分别建立井旁存在交叉裂缝和弧状裂缝的交叉裂缝反射界面计算模型和弧状裂缝反射界面有限元计算模型。通过对相同源距条件下不同接收点接收的波形数据进行处理,得到反射波波至时间等参数,进而判断出页岩储层井旁裂缝的分布规律。结果表明:反射波的波至时间随声源纵坐标变化而呈现的规律与井旁裂缝的形态表现出了很好的致性,井旁存在交叉裂缝时,根据波至时间计算得到井旁裂缝倾角为10.13°和20.19°,与解析模型对比的误差率分别为1.31%和0.95%。井旁存在弧状裂缝时,由反射波波至时间得出反射界面的坐标,并与计算模型结果进行对比,得到裂缝中心位置与反射点坐标相对误差为1.70%。声波有限元方法可以有效地反演出井旁裂缝的位置和形态特征。
关键词:  页岩储层  声波测井  声波有限元  裂缝分布  裂缝反射界面
DOI:10.3969/j.issn.1673-5005.2018.03.007
分类号:TE151
基金项目:中国博士后科学基金项目(2017M612375);中央高校基本科研业务费专项(18CX02154A);国家自然科学基金项目(51374228);国家科技重大专项(2016ZX05017-003)
Near wellbore fracture distribution characteristics based on acoustic reflection logging finite element method
YAN Yifei1,2, ZHAO Yun2,3, SONG Shengli4, BAO Xitao2, ZHOU Xiaoqi4, ZHAO Lei1,2, YAN Xiangzhen2
(1.College of Mechanical and Electronic Engineering in China University of Petroleum(East China), Qingdao 266580, China;2.Oil and Gas CAE Technology Research Center in China University of Petroleum(East China), Qingdao 266580, China;3.Hefei Oriental Display Technology Company Limited, Hefei 230012, China;4.Petroleum Engineering Technology Research Institute of Zhongyuan Oilfield, SINOPEC, Puyang 457001, China)
Abstract:
Based on the theory of acoustic wave propagation, reflected wave characteristics are studied by the finite element method in the presence of well fracture. 2D axial symmetry finite element modeling is applied on one side of discontinuous acoustic impedance. The models to computing cross fracture reflection interface and arc fracture reflection interface are established for the cases where cross fracture and arc fracture exist on the side of well. Waveform data from the same source received by the different receivers are processed and the parameters (e.g., reflection phase arrival time) are obtained. The distribution character of wellbore fracture in shale reservoir is obtained accordingly. The results show that the variations in the arrival time of the reflected wave owing to the changes in the vertical coordinates of sound source is consistent with the shape of the wellbore fracture. In the presence of a cross shaped fracture near the wellbore, inclination angles of the side fracture obtained using the arrival time of reflected wave are 10.13 degrees and 20.19 degrees, respectively, which are within 1.31% and 0.95% of the analytical model. In the case of an arc shaped fracture near the wellbore, the location and shape feature of the wellbore fracture can be effectively derived by the coordinates of the reflecting interface. The relative error between the central position of fracture and the coordinate of reference point is within 1.70%.It is concluded that the acoustic finite element method can effectively infer the position and morphology of fracture near the wellbore.
Key words:  shale reservoir  acoustic logging  acoustic finite element  fracture distribution  fracture reflection interface
版权所有 中国石油大学学报(自然科学版)编辑部 Copyright©2008 All Rights Reserved
主管单位:中华人民共和国教育部 主办单位:中国石油大学(华东)
地址: 青岛市黄岛区长江西路66号中国石油大学期刊社 邮编:266580 电话:0532-86983553 E-mail: journal@upc.edu.cn
本系统由:北京勤云科技发展有限公司设计