引用本文:
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览次   下载 本文二维码信息
码上扫一扫!
分享到: 微信 更多
可控复合脉冲爆燃压裂动态加载模型
吴飞鹏1,贾涵2,任杨1,刘敏1,蒲春生1,赵玉川3
(1.中国石油大学石油工程学院,山东青岛 266580;2.长江大学地球科学学院,湖北武汉 430100;3.中原油田勘探局,河南濮阳 457000)
摘要:
针对单级火药爆燃速度单一、延迟点燃连接装置稳定性欠佳的问题,提出高低燃速火药串联装配、中心管同步点燃新型工艺,进而基于不同爆燃速度火药的燃速方程,借助火药结构几何模型、质量守恒方程、能量守恒方程和气体状态方程建立多级脉冲组合火药爆燃加载模型,据此定量计算不同比例组合火药爆燃加载压力与时间的动态变化。结果表明:组装火药可有效协同高低燃速火药爆燃加载优势,既可用少量高燃速火药迅速产生高压破裂储层,又不会产生过大峰值压力破坏套管,同时又能利用大剂量低燃速火药长时有效延伸裂缝;在确保迅速破裂储层基础上,尽量减少高速火药量、增加低速火药量,以便建立施工安全和措施效果的有效平衡,同时可在套管安全的前提下扩大整体装药量,提高措施效果。
关键词:  气体压裂  火药爆燃  加载模型  密闭空间
DOI:10.3969/j.issn.1673-5005.2015.03.016
分类号::TE 355
基金项目:国家自然科学基金项目(51104173,9);国家科技重大专项 (20011ZX05009-004)
Dynamic modeling of gas loading with controllable ignition of propellants for downhole blasting fracturing
WU Feipeng1, JIA Han2, REN Yang1, LIU Min1, PU Chunsheng1, ZHAO Yuchuan3
(1.School of Petroleum Engineering in China University of Petroleum, Qingdao 266580, China;2.School of Earth Science in Yangtze University, Wuhan 430100, China;3.Zhongyuan Petroleum Exploration Bureau, Puyang 457000, China)
Abstract:
A new ignition technique was proposed for downhole blasting fracturing using high energy propelants, in which a high speed and a low speed propellant are loaded in series with simultaneous ignition in a central tube. The new technique can avoid the problems of the currently ones that use single speed and one-pulse propellant for its instability and ignition-delay. Based on the different deflagration speed equations, the mass and energy conservation equations, a dynamic gas loading model of the multi-pulse deflagration was established, which can be used to simulate the dynamic loading process with different ratios of the propellants. The results show that the packaged propellants work well with the dynamic loading of the combination of the high and low speed propellants, in which a small quantity of the high speed propellant is ignited to generate a high pressure for initializing fractures, and large amounts of the low-speed propellant are ignited for the enlargement and extension of the fractures. It is suggested that, in order to achieve initializing fractures quickly and the protection of the casing, the usage of the high deflagration speed propellant can be reduced, while the quantity of the low deflagration speed propellant can be increased.
Key words:  gas fracturing  propellant deflagration  loading model  confined space
版权所有 中国石油大学学报(自然科学版)编辑部 Copyright©2008 All Rights Reserved
主管单位:中华人民共和国教育部 主办单位:中国石油大学(华东)
地址: 青岛市黄岛区长江西路66号中国石油大学期刊社 邮编:266580 电话:0532-86983553 E-mail: journal@upc.edu.cn
本系统由:北京勤云科技发展有限公司设计