引用本文:
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览次   下载 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于瞬态流场计算的滑动轴承静平衡位置求解
李强1,许伟伟2,赵月3,邢春雷3,金有海1,郑水英4
(1.中国石油大学化学工程学院,山东青岛 266580;2.中国石油大学储运与建筑工程学院,山东青岛 266580;3.中国石油天然气管道工程有限公司,河北廊坊 065000;4.浙江大学化工机械研究所,浙江杭州 310027)
摘要:
将计算流体动力学与动网格法应用于滑动轴承静平衡位置的求解,通过采用全新的变流域动网格技术,在瞬态流场计算的基础上提出一种静平衡位置求解方法。在求解过程中考虑油膜发散区内气穴的存在,并与其他油膜边界条件进行比较。通过流场分析计算不同静载荷、轴承结构、油膜间隙和轴颈旋转速度下的静平衡位置。数值计算表明:滑动轴承的静平衡位置与轴颈初始位置无关;随着静载荷的变化,静平衡位置点呈半圆分布;静平衡位置的坐标和迭代轨迹可以用来分析不同速度下不同轴承结构的稳定性;对于多油楔轴承,顶隙对静平衡位置的影响要大于侧隙。
关键词:  滑动轴承  计算流体力学(CFD)  静平衡位置  动网格  瞬态流场计算
DOI:10.3969/j.issn.1673-5005.2015.02.017
分类号::TH 133
基金项目:国家“863”计划项目(2009AA04Z413);国家自然科学基金项目(51275452);山东省优秀中青年科学家科研奖励基金项目(BS2014ZZ014);中央高校基本科研业务费专项(15CX02027A)
Solution of static equilibrium position of journal bearing based on transient flow calculation
LI Qiang1, XU Weiwei2, ZHAO Yue3, XING Chunlei3, JIN Youhai1, ZHENG Shuiying4
(1.College of Chemical Engineering in China University of Petroleum, Qingdao 266580, China;2.College of Transport & Storage and Civil Engineering in China University of Petroleum, Qingdao 266580, China;3.China Petroleum Pipeline Engineering Corporation, Langfang 065000, China;4.Institute of Chemical Machinery, Zhejiang University, Hangzhou 310027, China)
Abstract:
The computational fluid dynamics (CFD) and dynamic mesh method were applied to the numerical calculation of static equilibrium position of journal bearing. By employing a new mesh movement approach based on structured grid, a new approach to calculate the static equilibrium position of journal bearing was proposed based on the transient flow calculation. The effect of cavitations in the divergence area was considered in the method, and the computational results were compared with the results under other boundary conditions during the solving process. The static equilibrium positions were calculated under different static load, bearing structure, oil film clearance and rotational speed. The calculation results indicate that the static equilibrium position is independent of the initial position of journal. There will be a semicircular distribution of static equilibrium position when the static load changes. The stability of journal bearing under different velocities can be characterized by the position of journal center and journal whirling orbit. For multi-wedge journal bearing, the effect of the tip clearance on the results is larger than that of the side clearance.
Key words:  journal bearing  computational fluid dynamic (CFD)  static equilibrium position  dynamic mesh  transient flow calculation
版权所有 中国石油大学学报(自然科学版)编辑部 Copyright©2008 All Rights Reserved
主管单位:中华人民共和国教育部 主办单位:中国石油大学(华东)
地址: 青岛市黄岛区长江西路66号中国石油大学期刊社 邮编:266580 电话:0532-86983553 E-mail: journal@upc.edu.cn
本系统由:北京勤云科技发展有限公司设计