引用本文:
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览次   下载 本文二维码信息
码上扫一扫!
分享到: 微信 更多
水平井段超临界CO2携岩数值模拟
宋维强,王瑞和,倪红坚,霍洪俊,沈忠厚,陈修平
(中国石油大学石油工程学院,山东青岛 266580)
摘要:
超临界CO2是一种极具潜力的钻完井介质,研究其携岩机制是超临界CO2钻井技术的重要发展方向。以实测数据设置环空入口岩屑粒径分布,考虑流场中CO2密度和黏度与温度、压力条件的耦合关系及钻杆转动的影响,对温度、压力、排量、转速、岩屑直径、岩屑体积分数及偏心度对携岩效率的影响进行数值模拟分析。结果表明:岩屑床中小颗粒的体积分数下降,大颗粒体积分数的增幅随直径增大而减小;CO2携岩能力随温度的降低和压力的升高而增强,影响规律与室内试验结果相符;增大排量、降低机械钻速可提高CO2携岩效率,而钻杆转速对携岩效率影响甚微;偏心度为0.8时携岩最为困难;水平井钻进时应添加增黏剂以改善CO2携岩效果。
关键词:  钻井  超临界CO2  水平井  携岩  钻杆转速  偏心度
DOI:10.3969/j.issn.1673-5005.2015.02.010
分类号::TE 21
基金项目:国家“973”计划项目(2014CB239202);国家自然科学基金项目(51034007);山东省自然科学基金重点项目(ZR2011EEZ003);教育部博士点基金项目(20120133110011);中央高校基本科研业务费专项(14CX02166A)
Numerical simulation of cuttings transport capability of supercritical carbon dioxide in horizontal wells
SONG Weiqiang, WANG Ruihe, NI Hongjian, HUO Hongjun, SHEN Zhonghou, CHEN Xiuping
(School of Petroleum Engineering in China University of Petroleum, Qingdao 266580, China)
Abstract:
Supercritical CO2 can be one of the most promising drilling and completion fluids, so it is of fundamental and practical importance to investigate its cuttings carrying mechanism. Numerical simulation was conducted to investigate the effects of various factors on CO2 's cuttings carrying capability, including temperature, pressure, rotation speed and cuttings size and production rate, in which the cuttings size distribution at the annulus entrance was set based on the measurement data in the experiments. In addition, the influence of coupled relationship between the density and viscosity of CO2 as a function of temperature and pressure and the rotation of drill pipe was considered in the numerical simulation. The results show that the cuttings carrying capability of CO2 can be improved by reducing temperature or increasing pressure, and the simulation results are consistent with that of the experiments. It is also found that the rotation speed of drill pipe has little influence on the cutting carrying capability, and the minimum of cuttings carrying capability appeared when the annulus eccentricity equals 0.8. The cuttings carrying capability can also be improved by increasing the displacement capacity or reducing the penetration rate, while viscofier can be added to improve the cuttings carrying capability of CO2 in horizontal well drilling.
Key words:  drilling  supercritical CO2  horizontal well  cuttings carrying capability  rotation of drill pipe  eccentricity
版权所有 中国石油大学学报(自然科学版)编辑部 Copyright©2008 All Rights Reserved
主管单位:中华人民共和国教育部 主办单位:中国石油大学(华东)
地址: 青岛市黄岛区长江西路66号中国石油大学期刊社 邮编:266580 电话:0532-86983553 E-mail: journal@upc.edu.cn
本系统由:北京勤云科技发展有限公司设计