本文已被:浏览次 下载次 |
码上扫一扫! |
|
塔里木盆地大北地区巴什基奇克组成岩相测井识别 |
杨宁1,王贵文2,3,李潮流4,信毅5,于峰丹6,年涛2,3
|
(1.中国石油长城钻探工程有限公司,北京 100101;2.中国石油大学油气资源与探测国家重点实验室,北京 102249;3.中国石油大学地球科学学院,北京 102249;4.中国石油勘探开发研究院测井所,北京 100083;5.中国石油塔里木油田公司勘探开发研究院,新疆库尔勒 841000;6.中国地质调查局西安地质调查中心,陕西西安 710054)
|
|
摘要: |
依据成岩序列和成岩阶段划分原理,结合储层岩心观察、铸体薄片、阴极发光,扫描电镜、X射线衍射等资料,对塔里木盆地大北地区巴什基奇克组成岩相定量划分及测井表征进行研究。结果表明:塔里木盆地大北地区巴什基奇克组划分为强压实相、不稳定组分溶蚀相、钙质胶结相、构造裂缝相4种成岩相类型;将综合成岩系数作为成岩相表征的参数,相比前人的研究方法能够很好地解决成岩相定量划分的问题;综合成岩系数的测井资料计算可以实现测井资料模块化处理定量识别成岩相;提出的成岩相识别新方法与岩心分析资料形成良好的印证,方法准确可靠。 |
关键词: 大北气田 成岩相 综合成岩系数 定量表征 测井识别 |
DOI:10.3969/j.issn.1673-5005.2014.05.003 |
分类号::TE 122.2 |
基金项目:国家大型油气田及煤层气开发科技重大专项(2011ZX05020-008) |
|
Reservoir diagenetic facies of Bashijiqike Formation in Dabei gas field compartmentalization and quantitative evaluation |
YANG Ning1, WANG Guiwen2,3, LI Chaoliu4, XIN Yi5, YU Fengdan6, NIAN Tao2,3
|
(1.CNPC Greatwall Drilling Company, Beijing 100101, China; ;2.State Key Laboratory of Petroleum Resource and Prospecting in China University of Petroleum, Beijing 102249, China;3.College of Geosciences in China University of Petroleum, Beijing 102249, China;4.RIPED Logging Institutes, Beijing 100083, China;5.Exploration and Development Research Institute of CNPC Tarim Oilfield Company, Korla 841000, China; ;6.Xi 'an Center of Geology Survey,CGS, Xi 'an 710054, China)
|
Abstract: |
Based on the division principle of diagenetic sequence and diagenetic stage, this paper studied the quantitative division and logging identification of diagenetic facies for Bashijiqike Formation in Dabei area of Tarim Basin using reservoir data of core observations, and methods such as cast thin, cathodoluminescence, SEM and X-ray diffraction. The results show that the diagenetic facies can be divided into four types:compaction density facies, corrosion of unstable components facies, calcareous cementation facies, and structural fracture facies. Compared to previous methods, the method used here with comprehensive diagenetic coefficient as characterization parameters can be a good solution to the problem of quantitative division. Comprehensive diagenetic coefficient can be used in logging data processing to identify diagenetic facies. The results obtained from the method agree well with the core analysis data, and the method is accurate and reliable. |
Key words: Dabei gas field diagenetic facies diagenetic integrated coefficient quantitative identification logging identification |