引用本文:
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览次   下载 本文二维码信息
码上扫一扫!
分享到: 微信 更多
动量插值的一种简单有效的修正
刘豫龙1,2, 徐明海1, 刘德绪3, 龚金海3, 莫 琼3
(1.中国石油大学储运与建筑工程学院,山东青岛 266580;2.中国石化胜利油田分公司胜利发电厂,山东东营 257087;3.中国石化中原石油勘探局勘探设计研究院,河南濮阳 457001)
摘要:
针对动量插值数学上的不足,提出一种简单的修正格式,采用与原始的SIMPLE算法非常相似的推导过程,得到不可压流体流动的一种简单的同位网格SIMPLE算法。利用有限数值算例证明新提出的同位网格算法的有效性。结果表明,所有界面速度均采用算术平均值,具有编程简单、内存占用少的优点,同时有效地克服了计算结果与松弛因子有关的的缺点,并克服了同位网格上用动量插值计算界面速度的数学上的缺陷。
关键词:  动量插值  SIMPLE算法  不可压缩流动  有限容积
DOI:10.3969/j.issn.1673-5005.2014.02.022
分类号:TK 12 〖HTH〗
基金项目:国家自然科学基金项目(51276199);国家科技重大专项(2011ZX05017-004-HZ01)
A simple and effective correction for momentum interpolation
LIU Yu-long1,2, XU Ming-hai1, LIU De-xu3, GONG Jin-hai3, MO Qiong3
(1.College of Pipeline and Civil Engineering in China University of Petroleum, Qingdao 266580, China;2.Shengli Power Plant in Shengli Oilfield, SINOPEC, Dongying 257087, China;3.Survey and Design Institute of Zhongyuan Petroleum Exploration Bureau, Puyang 457001, China)
Abstract:
A SIMPLE algorithm for collocated grid was proposed, which was used to solve incompressible flow problems. This algorithm is a simple modification for momentum interpolation. The derivation process of this algorithm is similar to that of the original SIMPLE algorithm. The effectiveness of this algorithm was verified with some benchmarked problems. In this correction, all velocities on the faces are calculated with algebraic method, and so the code possesses the advantages of simple programming and less memory footprint. This correction overcomes some mathematics shortcomings of the momentum interpolation, and can solve those problems that the computation results are dependent on the relaxation factor of velocity.
Key words:  momentum interpolation  SIMPLE algorithm  incompressible flow  finite volume method
版权所有 中国石油大学学报(自然科学版)编辑部 Copyright©2008 All Rights Reserved
主管单位:中华人民共和国教育部 主办单位:中国石油大学(华东)
地址: 青岛市黄岛区长江西路66号中国石油大学期刊社 邮编:266580 电话:0532-86983553 E-mail: journal@upc.edu.cn
本系统由:北京勤云科技发展有限公司设计