引用本文:
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览次   下载 本文二维码信息
码上扫一扫!
分享到: 微信 更多
水下分流河道单砂体剩余油分布规律与挖潜对策
徐慧1,林承焰1,雷光伦2,宫保3,范彩匣3
(1.中国石油大学 地球科学与技术学院,山东 青岛 266580;2.中国石油大学 石油工程学院,山东 青岛 266580;3.中国石油大庆油田采油八厂,黑龙江 大庆 163514)
摘要:
依据层次分析法,对升平油田葡萄花油层葡Ⅰ油组水下分流河道单砂体的层次及平面展布形态进行研究,并通过油藏工程分析及数值模拟,研究各类单砂体的剩余油分布规律、影响因素及相应的挖潜对策。结果表明:研究区单砂体相当于复合河道砂体层次,可分为连片式、交切条带式、孤立条带式3种展布样式,单砂体宽度和厚度逐次降低;砂体越连片,厚度越大,受平面非均质性和沉积韵律影响越严重;砂体越分散,厚度越小,受注采不完善影响越严重;高含水期的剩余油挖潜对策为连片式砂体调整为五点法注采井网,交切条带式调整为枝状分散河道注水、交切区采油的注采井网,孤立条带式调整为点状交错注采井网,同时注水井采用周期注水方式,采油井采取放大生产压差提液,对薄差砂体部位的水井实施酸化改造,油井实施压裂改造。
关键词:  水下分流河道  单砂体  水驱控制程度  注采完善程度  剩余油  挖潜
DOI:10.3969/j.issn.1673-5005.2013.02.003
分类号::TE 122
基金项目:国家科技重大专项(2011ZX05009-003)
Remaining oil distribution law and potential tapping measures of subaqueous distributary channel single sandbody
XU Hui1, LIN Cheng-yan1, LEI Guang-lun2, GONG Bao3, FAN Cai-xia3
(1.School of Geosciences in China University of Petroleum, Qingdao 266580, China;2.School of Petroleum Engineering in China University of Petroleum, Qingdao 266580, China;3.No.8 Oil Production Plant of Daqing Oilfield, Daqing 163514, China)
Abstract:
Based on the analytic hierarchy process, the hierarchy and planar distribution characteristics of single sandbody of Pu Ⅰ oil group in Putaohua reservoir of Shengping Oilfield were studied. Then the remaining oil distribution, influencing factors and the potential tapping measures were researched by using reservoir engineering analysis and numerical simulation. The results show that the single sandbody is equal to compound channel sandbody hierarchy, and could be divided into flaky form, cross-cutting banded form and isolated banded form. The width and thickness of single sandbody successively reduce. The more contiguous the sandbody and the greater the thickness, the more seriously the plane heterogeneity and sedimentary rhythm influences remaining oil distribution. The more scattered the sandbody and the smaller the thickness, the more seriously uncompleted well pattern influences remaining oil distribution. The potential tapping measures are as follows. The well pattern of flaky form single sandbody could be adjusted into five-spot water flooding pattern, with cross-cutting banded form single sandbody ,the branched channel sands inject water, the cross-cutting areas product oil. The well pattern of isolated banded form single sandbody could be scattered and crossed water flooding pattern. The water injection mode could be adjusted into cyclic waterflooding and the production wells could be enlarged the drawdown pressure. Injectors in poor sands could be acidified and producers in poor sands could be fractured.
Key words:  subaqueous distributary channel  single sandbody  water flooding control degree  degree of injection to production  remaining oil  potential tapping
版权所有 中国石油大学学报(自然科学版)编辑部 Copyright©2008 All Rights Reserved
主管单位:中华人民共和国教育部 主办单位:中国石油大学(华东)
地址: 青岛市黄岛区长江西路66号中国石油大学期刊社 邮编:266580 电话:0532-86983553 E-mail: journal@upc.edu.cn
本系统由:北京勤云科技发展有限公司设计